Supplies Needed:

DC-04 Stocking Die Cut

Pop Dots

Wire or String

Card Stack or Pre-cut Cardstock (5.5" x 8.5")

White Vellum (if you use alternate design) precut to 8.5 x 11 or the white adhesive vellum that we sell here at SG would work great!

Steps:

1.  Using your computer type up "All the stockings were hung by the chimney with care . . . " and print onto the card approx. 1" from the bottom of the card. 

VARIATION:

Print onto vellum and attach to your card using eyelets or brads

or

Print onto adhesive vellum and place on your card!  Do a test print onto plain paper so that you can ensure that your text is properly aligned.  I would strongly recommend that you place all of the text onto the sheet with ample spacing so that you can make your cuts without worry.

2.  Cut piece of wire approx. 7.5" long.  If you cut it too short you won't have room to twirl the ends.  Remember, if it is too long once it is on your card you can always trim it, but if you cut it too short -- you'll be cutting again.

3.  Punch out die cut and one place pot dot at the top and another at the bottom.

4.  Adhere to card, making sure the wire piece is placed onto the pot dot before it is placed onto the card.